Search results

  1. guily6669

    Switch-OC-Suite

    EOS is pretty much safe, mostly the only problem is nand corruption but you do it in emunand if any problem happens you simply put the backup back and it's all back to working order until you find safe values... Anyway if you use No_adj_all and don't mess with ram timings it's unlikely you will...
  2. guily6669

    Homebrew RELEASE Tesla - The Nintendo Switch Overlay Menu

    I'm using the one updated for FW18 on FW17.0.1 and seem to be working fine for me so far...
  3. guily6669

    Switch-OC-Suite

    I can't remember what NX venom uses if Switchcraft 1.2.5 or EOS 1.2.5.... TEST ONLY IN EMUNAND, start with the max undevolt CPU UV 3 and use mem tester or other app that put's the CPU at 100% and change frequencies a bit to see if it ever give you any problem... For the GPU use the GPU UV 2...
  4. guily6669

    Switch-OC-Suite

    I have no idea, but it's likely that they are, you can just backup your old, do a profile on latest sys_clk and see if it's written the same way so you can add all your profiles into it and even if it changed the syntax I'm sure you can easily figure out and convert. But I have no clue cause I...
  5. guily6669

    Switch-OC-Suite

    New sys-clk (sys-clk-oc_0525.7z) came out and new EOS 1.2.5... Just an example: [Atmosphere CFW] fss0=atmosphere/package3 kip1patch=nosigchk kip1=atmosphere/kips/loader.kip emummcforce=1 icon=bootloader/res/icon_payload.bmp [Atmosphere SAFE MODE] fss0=atmosphere/package3 kip1patch=nosigchk...
  6. guily6669

    Switch-OC-Suite

    Also forgot to say you cant use any Oled loader.kip, EOS 1.2.4 must use its own loader.kip which is all in its files, if the version changes like if a new come out you will have to use the new loader.kip. There's also switchcraft 1.2.4 and it must use its own loader.kip too if you chose it over...
  7. guily6669

    Switch-OC-Suite

    EPV is old, was the 1st to have erista CPU UV but now EOS has it and better... You have to use latest version to support atmos 1.7.0 and FW 18+... EOS 1.2.4 + latest sys-clk-oc8 0512. If you set something in it and doesn't boot you can configure in the PC using the configurator html page or...
  8. guily6669

    Switch-OC-Suite

    I'm just sharing knowledge of the latest official stuff. OC suite will unlikely EVER get updated sadly... Anyone's up to chose, also I don't think you will be using it on latest atmos and latest FW unless someone fork it and make it compatible but will never have the newer stuff which is a...
  9. guily6669

    Switch-OC-Suite

    If you don't undervolt you lose a lot of potential, power consumption drops a lot so either you use same values you are used to but with a much cooler, less noise, less power draw and more battery life or you can use it to go higher frequencies maintaining the same power consumption but with...
  10. guily6669

    Switch-OC-Suite

    Use latest EOS 1.2.4 + latest sys-clk-oc8 0512, it's explained above where to get them all by anon730. Just delete the old files and use the new ones and to configure the OC you use the overlay, you don't need to use the html page configurator from a PC, you can now do it from switch overlay...
  11. guily6669

    Switch-OC-Suite

    Ask everything in the discord Overclocking section....
  12. guily6669

    Homebrew Homebrew app Ultrahand Overlay - The fully craft-able overlay executor

    The new beta is crazy FAST!!!!!!! Everyone will be very happy when you finish it B-)
  13. guily6669

    Nintendo takes down Gmod content from Steam's Workshop

    I wonder when will be the day we draw some nintendo character and have to go to court and pay millions to nintendo for drawing like a gay Super Mario :toot: :rofl2:
  14. guily6669

    Switch-OC-Suite

    Best memtest is the latest one made by Lineon. But be careful with uncapped clocks so you don't use much higher clocks on battery. On battery try to maintain max of 8W of power consumption. You can try CPU UV 3 if it doesn't work use CPU UV 2, will consume less power, less heat and less fan...
  15. guily6669

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    Oh I didn't check the image posted... That's from atmosphere logo official, have always been like that when using fusee it uses the atmosphere boot logo B-)
  16. guily6669

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    The kip1 line is just for OC to load loader.kip OC settings, you don't use that line unless you use OC... I also use exhospere to blank serial number like you and 90dns + I had a default.txt with the nintendo servers that we put in atmosphere/hosts folder... The bootlogo is likely from your...
  17. guily6669

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    @SciresM would it be possible to ever add DDR200 support to HOS for much faster microSD speeds or just not possible hardware wise?? 1715259819 Never had any problem... Though I use fusee payload... But my FSS0 settings also work fine too: Make sure you have everything updated and using latest...
  18. guily6669

    Name the Switch successor: what should Nintendo call its new console?

    They should call it Nintendo Switch 1, the one they always wanted to make but crapped out... This time with proper hall effect man size joysticks, proper analog triggers and a dock with proper GPU inside, 4K 120hz here we go :toot: Haha I like RC planes and turnigy makes awesome stuff for...
  19. guily6669

    Switch-OC-Suite

    Yep he just released a new sys-clk-oc final3 hours ago so should use it instead, the final2 was bugged and he fixed it right away to final3... Anyway the features are: 1- reversenx sync now respects clock cappings 2- fixed issue of sys-clk not working on boot for some people 3-...
  20. guily6669

    Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

    Always used it 4 years and 0 issues except I don't use sys-patch... I'm using modded fusee with Sigpatches and no sys-patch. I'm using atmos 1.7.0 and FW 17.0.1 here...
General chit-chat
Help Users
  • No one is chatting at the moment.
  • S @ salazarcosplay:
    the author has the final aproval
  • S @ salazarcosplay:
    hunter x hunter
  • S @ salazarcosplay:
    he has not allowed anyone to continue it for him for example
  • Xdqwerty @ Xdqwerty:
    @salazarcosplay, theres a dragon ball af mod for budokai 3
  • Xdqwerty @ Xdqwerty:
    updated ship of harkinian, gonna install some hd texture pack
  • Xdqwerty @ Xdqwerty:
    I might download rayman revolution for my ps3
  • BigOnYa @ BigOnYa:
    I may try the new ram site, and download more RAM to my Switch. Not sure if ddr3 is the right ram
    for it tho. Edit- no it uses floppy Ram, just like @AncientBoi
    +1
  • Xdqwerty @ Xdqwerty:
    aeiou
  • BigOnYa @ BigOnYa:
    And sometimes Z
  • SylverReZ @ SylverReZ:
    @K3Nv2, MAGA supporters be wearing tin foil hats lol.
    +1
  • Xdqwerty @ Xdqwerty:
    @SylverReZ, whats maga?
  • BigOnYa @ BigOnYa:
    It stands for Maniacs Against General Acceptance
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, people rejecting general consensus about stuff?
    +1
  • BigOnYa @ BigOnYa:
    Yup, nuh its really just Trump followers
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, im not american so i dont care about trump
    +1
  • Xdqwerty @ Xdqwerty:
    or us elections
  • BigOnYa @ BigOnYa:
    Me niether, us north Koreans don't care
  • Xdqwerty @ Xdqwerty:
    good night
  • BakerMan @ BakerMan:
    i don't care either, even if i'm american
  • BakerMan @ BakerMan:
    truth be told, i agree with psi, i dislike both candidates, but i'd probably vote trump simply because the economy was better during his presidency
  • AngryCinnabon @ AngryCinnabon:
    Just be careful, if trump ends up winning and using project 2025 America might really change...for the worse.
  • AngryCinnabon @ AngryCinnabon:
    I'm not american and even that sends shivers down my spine.
  • AngryCinnabon @ AngryCinnabon:
    anything that offers trump an opportunity to become an actual dictator
    is bad in my book, i could care less if it wasn't for that...
  • K3Nv2 @ K3Nv2:
    Canada: America's Russia
    K3Nv2 @ K3Nv2: Canada: America's Russia