Try installing SCFW and using an SDHC micro sd.
You don't even need the software from the supercard.
The flash ID error is from changing to a compatible chip.
Chip commands seem to be the same.
I found it on AliExpress, ordered 2 and they arrived today.
They were probably the last ones in stock.
Unfortunately, they had good PSRAM.:rofl:
The cartridges are pretty thick, so I expect the PSRAM to be under pressure constantly.
It seems to be the cause of cold solder joint.
A lot of the...
https://en.wikipedia.org/wiki/Lens_fungus
If it's inside, it could be a fungus.
Long hyphae are often seen, but there are many different types.
If you look closely and don't see mycelium, it's probably not fungus.
Yes, that's fine.
Sometimes it doesn't work well in-circuit.
In most cases, it's recommended to remove the EEPROM with a hot air station and solder it to the board before using it.
You can also use SOP-8 sockets without soldering.
https://github.com/DS-Homebrew/GodMode9i/blob/master/arm9/source/dumpOperations.cpp
The GM9 will not dump properly because it only contains EEPROM information from commercial cartridges.
You will need to use a programmer like ch341a to dump it.
All you can see are the finely tuned traces and the unmounted pads.
It doesn't look like anything has changed, but all of the change could be under the DS cartridge slot.
I don't know when, but recent devkitpro has become strict about definitions and pointer types.
Many warnings have been changed to errors, so you can build after fixing them.
Currently SCFW doesn't have a database, so finding the savetype is the most time consuming thing.
With a database, like ez-flash and everdrive, it will definitely be faster.
This is a firmware update file that runs on SLOT-1 (DS, DS LITE).
If you don't have a micro SD of 2GB or less, you can use this file to update it.
Testing environment
I tried running it from ysmenu flashcart.
I expect it will probably run on other ds flashcart as well.
It updated properly on a...
I tried it today and it worked.
Just a few tips
aliexpress.com/item/1005005034769839.html
ds lite network card 1pcs - 0.23$
aliexpress.com/item/1005004535661601.html
LE25FW403ATT 5pcs - 4.92$
Get an LE25FW403A or M45PE40.
network card,
CH341A programmer,
sop8 board(Usually included when...
I can't say it's a problem of omega de because omega de works well in real gba sp.
Probably not enough power to run omega de.
Alternatively, there is a possibility that the cartridge's pin contact is weak.
Of course, everdrive gba is better than omega de in many ways.
When you need electronic...
I have several Japanese DS lite and wanted to replace them with Korean firmware.
I also have a few Korean DS lite, but I haven't taken them apart.
On the Korean DS lite, the Italian language has been changed to Korean.
https://cdn.randommeaninglesscharacters.com/guide/ds-ique-firmware/titles_with_512.txt
First of all, thank you for the guide.
I'm preparing to do this soon.
M25PE40 has a different pin configuration.
Is there a different pcb version of the wifi board?
Or is it simply written wrong?