Homebrew ROM Hack Project+ on vWii using USB loader?

[Wavy]

Just re-hacked my Wii U to install Tiramisu on it, and hacked the vWii on it as well. I did this to get Project+ (Smash Brawl mod) to run on it, however the video guide made by the Project+ team doesn't specify if there is any specific steps in order to get it to work on the vWii. I'm using a PAL system with only an NTSC ISO of Brawl so I can only use the USB Loader method (I think. Unless there's another method that can work).

Edit: Should also mention that I followed the guide from wiiu.hacks.guide to hack my Wii U and vWii.

 

[Exotical]

Just re-hacked my Wii U to install Tiramisu on it, and hacked the vWii on it as well. I did this to get Project+ (Smash Brawl mod) to run on it, however the video guide made by the Project+ team doesn't specify if there is any specific steps in order to get it to work on the vWii. I'm using a PAL system with only an NTSC ISO of Brawl so I can only use the USB Loader method (I think. Unless there's another method that can work).

Edit: Should also mention that I followed the guide from wiiu.hacks.guide to hack my Wii U and vWii.

How about you use your actual Brawl disc instead of an ISO, just extract Project+ to the root of the SD, launch the Homebrew Channel then run the Project+ Launcher.

 

[KeinesR]

You can, but you need an usb and a SD card, i play with both. need to set ocarina too

 

[Wavy]

You can, but you need an usb and a SD card, i play with both. need to set ocarina too

Interesting. Could you tell me the steps in order to get it to work? That is if the process is different to the one in Project+'s video.

 

[Wavy]

Good news: I got it to work!

I followed this guide from r/SSBPM on installing and running Project+ via USB Loader GX. For those who want the guide but are too lazy to open the link, here you go:

1. Download the Wii (Offline) build of Project+.
2. Extract it with 7zip or something, dunno just get it extracted.
3. Copy only the Project+ folder to your SD card, don't worry about apps and stuff.
4. Once it's copied, you need to copy some files out of the Project+ folder... This is the most important step to get it working properly.
5. Copy gc.txt from the Project+ folder to the root of your SD Card and rename it to gameconfig.txt
6. Create a folder called codes in your SD card root
7. Copy RSBE01.GCT from the project+ folder to the codes folder. Move onto next step. If later project+ doesnt start: try rename the file extension to lowercase gct. (on Windows this is strange because it just corrects back to the uppercase version, to work around this, first rename the extension to aaa or something else, then rename it to gct lowercase and it should be fine), this worked for me for some reason
8. Moving on, make sure your brawl game dump is in wbfs on your fat32 usb drive. You probably already did this. Also, insert your USB to port 0, the closest USB port to the edge of the Wii.
9. Plug your SD card into your wii, open up USB Loader GX. Go to Brawl > Settings.
10. Click on game load. Set video mode to "Force NTSC". Set Ocarina to "ON". Set Hooktype to "VBI".
11. Back out to brawl, start the game!

 

[KeinesR]

Sorry, i missread, i was able to play pmex remix, not project+, i guess it's the same at some point but i will try on the night and let you know.

 

[Arthas-Sama]

I've tried everything you said in the tutorial but I always get a black screen with a lot of numbers/errors. It must be something in the "ocarina code" (or gct), because the game loads normally without that.

Many years ago I made a Project M 3.6 iso just for the USB Loader. But now I can't figure this out

 

[CheesecakeG7]

I've tried everything you said in the tutorial but I always get a black screen with a lot of numbers/errors. It must be something in the "ocarina code" (or gct), because the game loads normally without that.

Many years ago I made a Project M 3.6 iso just for the USB Loader. But now I can't figure this out

I've used this program before called Brawl Builder.
It makes an ISO of Project M and some other mods. Not every mod works though.

 

[grandosegood]

Good news: I got it to work!

I followed this guide from r/SSBPM on installing and running Project+ via USB Loader GX. For those who want the guide but are too lazy to open the link, here you go:

can confirm this worked on vwii

 

[Leotobus]

I use an SDHC card and it don't work... What type card can I use ?