Hi!
I have a PS3 21xx with Evilnat 4.90 with 500gb SSD and work flawless witj low temps.
Today replace the SSD with 1tb HDD to have a backup just in case.
I install Evilnat 4.90 from usb, but when install the latest version of WebmanMOD the fan goes to 70% and the console shut off.
I wait a few minutes until the temperature drops to the usual values of the console, which are generally low (2 hours of TLOU 63 degrees-SSD).
The problem is that with low temperatures the console keeps turning off, if I put the SSD drive back in the console works perfectly again.
I tried 3 new drives (1tb, 500gb) and two different consoles (21xx, 20xx), both running Evilnat 4.90, and
I have the same problem.
The two consoles with SSD work perfectly.
Is there something I'm doing wrong with the HHD?
I have a PS3 21xx with Evilnat 4.90 with 500gb SSD and work flawless witj low temps.
Today replace the SSD with 1tb HDD to have a backup just in case.
I install Evilnat 4.90 from usb, but when install the latest version of WebmanMOD the fan goes to 70% and the console shut off.
I wait a few minutes until the temperature drops to the usual values of the console, which are generally low (2 hours of TLOU 63 degrees-SSD).
The problem is that with low temperatures the console keeps turning off, if I put the SSD drive back in the console works perfectly again.
I tried 3 new drives (1tb, 500gb) and two different consoles (21xx, 20xx), both running Evilnat 4.90, and
I have the same problem.
The two consoles with SSD work perfectly.
Is there something I'm doing wrong with the HHD?
