Firmware v1.1
Fixed the LED not off when injection fail problem.
Enhanced the stability of the injecting.
Firmware update instruction
1.Download the firmware file first from https://www.xkit.xyz/support/
2.Unzip the firmware file.
3.Connect the RCMloader one to your Computer via the MicroUSB cable.
4.Copy the IAP folder to the root of USB drive.The file like this, USB DRIVE:\IAP\FIRMWARE.BIN.
5.Un-plug the MicroUSB cable.
6.Plug the MicroUSB again, the RCMloader will auto upgrade in 3 seconds, then the IAP folder in USB DRIVE should be auto deleted.
Fixed the LED not off when injection fail problem.
Enhanced the stability of the injecting.
Firmware update instruction
1.Download the firmware file first from https://www.xkit.xyz/support/
2.Unzip the firmware file.
3.Connect the RCMloader one to your Computer via the MicroUSB cable.
4.Copy the IAP folder to the root of USB drive.The file like this, USB DRIVE:\IAP\FIRMWARE.BIN.
5.Un-plug the MicroUSB cable.
6.Plug the MicroUSB again, the RCMloader will auto upgrade in 3 seconds, then the IAP folder in USB DRIVE should be auto deleted.
