Tutorial
Updated
Downgrade to 6.2 with no NAND backup, get ReiNX back!
A lot of people seem confused on this subject. As was I about an hour ago. Thought i'd make a thread and (hopefully) help out a few people who are out of the loop or just plain can't resist the urge to update.
This thread may become irrelevant in the near future due to added 7.0 support
This should also help people interested in playing warez get their games and the ability to install NSP games back.
This guide assumes you are a ReiNX user who has updated their switch.
If you have updated to 7.0 as a ReiNX user you are either in the following two situations:
Situation 1:
Your switch cannot boot into a CFW due to having set up with ReiNX and not having 7.0 support
Situation 2:
You are using another CFW and cannot use any of your previously installed NSP games.
Follow this guide and get ReiNX back:
ReiNX should work as intended at this point.
This thread may become irrelevant in the near future due to added 7.0 support
This should also help people interested in playing warez get their games and the ability to install NSP games back.
This guide assumes you are a ReiNX user who has updated their switch.
If you have updated to 7.0 as a ReiNX user you are either in the following two situations:
Situation 1:
Your switch cannot boot into a CFW due to having set up with ReiNX and not having 7.0 support
Situation 2:
You are using another CFW and cannot use any of your previously installed NSP games.
Follow this guide and get ReiNX back:
- Download the latest release of Atmosphere CFW
- Extract the .zip onto your SD
- Download ChoiDujourNX and put it on your SD
- Find Nintendo Switch FW 6.2.0 somewhere or extract it from a game. (more info on how to do that in the release thread)
- Put your firmware files on your SD card in a folder named 6.2 FW
- Download hbl.nsp and put it in the atmosphere folder on your SD
- Enter RCM and launch fusee-primary.bin from the Atmosphere github page in step 1
- Launch the HBL by entering the album
- Launch ChoiDujourNX
- Choose Folder 6.2 FW as your install source
- Wait on OFW 6.2 to install make sure to choose the exFAT option if you have an exFAT formatted SD card
- Your switch should reboot into atmosphere, or be off at this point.
- Make sure your switch is on FW 6.2 if it is powered on.
- Turn off the switch and enter RCM and launch ReiNX.bin (which you should have from your previous install)
ReiNX should work as intended at this point.
Last edited by IHOP,